FCS-401 & FCS-402 Slab Bolsters
FCS-401 Slab bolster is used for supporting lower slab steel from slab form. Legs are spaced 5” on center. Available in 3/4” to 3” heights in 5’-0” lengths. Other lengths available on request.
FCS-402 Slab bolster with plastic tip is used for supporting lower slab steel from slab form. Legs are spaced 5” on center. Available in 3/4” to 3” heights in 5’-0” lengths. Other lengths available on request.
FCS-403 Slab Bolster Upper
CS-403 Slab bolster upper is used for supporting one layer of steel above another and spacing them to required distance. May be used on soft material or fill. Standard leg spacing is 5” on centers. Heights and lengths are same as slab bolsters. Fabricated in standard 5’-0” lengths. Other lengths available on request.
FCS-404 Slab Bolster With Plate
FCS-404 Slab bolster with plate is used for supporting lower slab steel on fill or other soft material. Details are the same as for standard slab bolster with the addition of a bearing plate. Available in 5’-0” lengths only.
FCS-405 & FCS-406 Beam Bolster
FCS-405 Beam bolster is used to support lower beam steel from the slab form. All legs spaced 2-1/2” on centers. Available in 3/4” to 5” heights in 5’-0” lengths. Other lengths available on request.
FCS-406 Beam bolster with plastic tip is used to support lower beam steel from the slab form. All legs spaced 2-1/2” on centers. Available in 3/4” to 5” heights in 5’-0” lengths. Other lengths available on request.
FCS-407 Beam Bolster Upper
FCS-407 Beam bolster upper is used to support successive layers of steel one above the other. Legs spaced 2-1/2” on centers in standard 5’-0” lengths. Other lengths available on request.
FCS-408 Beam Bolster With Plate
FCS-408 Beam bolster with plate is used to support heavy bottom steel on soft material. Details are same as for standard beam bolster with the addition of a bearing plate. Available in 5’-0” lengths only.
FCS-409 Joist Chairs
CS-409 Joist chairs are used to support two bottom bars in the ribs of joist- or grid-type slabs. Available in 4”, 5”, and 6” widths and 3/4”, 1” and 1-1/2” heights.
FCS-410 Individual Bar Chairs
FCS-410 Individual bar chairs are used to support wide-spaced light steel in slab/deck construction. Available in 3/4”, 1”, 1-1/2”, and 1-3/4” heights.
FCS-411 High Chairs for Metal Decking
FCS-410 High chairs for metal decking are made with different length legs to fit design of a metal deck. Other information same as individual high chairs.
FCS-412 & FCS-413 Individual High Chairs
FCS-412 Individual high chairs are designed to support upper slab steel from mat steel. May also be used on fill to obtain leg bearing. Made to order in heights from 2” to 20”. Height is from underside of cross bars to seat for reinforcing bar at top of chair. Also available with plastic tip or epoxy coated (FCS-413).
FCS-414 Special High Chairs
FCS-414 Special high chairs are used for supporting upper slab/deck steel directly or by means of a carrier bar. When heights exceed 12”, legs are reinforced with welded crosswires or encircling wire. Available in 2” to 20” heights.
FCS-415 Individual High Chair With Plate
FCS-415 Individual high chair with plate is used for supporting lower slab steel on fill or other soft material. Details are same as for individual high chairs with the addition of two bearing plates.
FCS-416 & FCS-417 Continuous High Chair
FCS-416 Continuous high chair provides support for upper slab steel from slab form. Fabricated in heights from 2” to 15” in 5’-0” lengths. Legs are spaced 7-1/2” on centers.
FCS-417 Continuous high chair with plastic tip provides support for upper slab steel from slab form. Fabricated in heights from 2” to 15” in 5’-0” lengths. Legs are spaced 7-1/2” on centers.
FCS-418 Continuous High Chair Upper
CS-418 Continuous high chair upper is used for supporting one layer of steel above another and spacing them to required distance. May be used on soft material or fill. Standard leg spacing is 7-1/2” on centers. Heights and lengths are same as slab bolsters. Fabricated in standard 5’-0” lengths. Other lengths available on request.
FCS-419 Continuous High Chair With Plate
CS-419 Continuous high chair with plate is used to support slab steel on fill or other soft materials. Details are same as continuous high chairs, with the addition of bearing plates.
